[نرم افزار] دانلود FLOW-3D v11.2 Update 2 x64 – نرم افزار شبیه سازی و تحلیل جریان مذاب

[ad_1]

کلمات کلیدی: flow-3d,simulation,cfd,engineering,casting,prediction,شبیه ساز,تجزیه و تحلیل,نرم افزار,تخصصی,CFD,ریختگری,تحلیل جریان مذاب,دانلود نرم افزار شبیه ساز,دانلود نرم افزار تجزیه و تحلیل,دانلود نرم افزار تخصصی,دانلود نرم افزار در زمینه CFD,دانلود نرم افزار ریختگری,دانلود نرم افزار تحلیل جریان مذاب,دانلود نرم افزار در زمینه رفتار دینامیکی مایعات و گازها,دانلود نرم افزار FLOW-3D

[ad_2]

لینک منبع

[نرم افزار] دانلود Mentor Graphics FloEFD Standalone + For CATIA & Creo & NX & Solid Edge v16.2.3828 x64 – نرم افزار آنالیز و حل دینامیک سیالات محاسباتی

[ad_1]

کلمات کلیدی: mentor,mentor graphics,graphics,graphic,flo,floefd,efd,mentor graphics floefd,thermal,thermal simulation,thermal solution,cfd,computational fluid dynamics,fluid,dynamics,dynamic,fluid dynamics,cfd dynamics,mechanic,materials,engineering,simulation,design,cad,3d design,3d simulation,طراحی,شبیه سازی,حرارت,حرارتی,شبیه سازی حرارتی,آنالیز,آنالیز حرارتی,آنالیز گرمایی,شبیه سازی گرمایی,خستگی,خزش,عمر مفید,شبیه سازی دینامیک,دینامیک,دینامیک سیالات,سیالات,دینامیک سیالات محاسباتی,سی اف دی,سی‌اف‌دی,مواد,متالورژی,مکانیک,مهندسی,مهندس,شبیه سازی مهندسی

[ad_2]

لینک منبع

[نرم افزار] دانلود PumpLinx v4.0.3 x64 – نرم افزار CFD، شبیه سازی و آنالیز سیستم های هیدرولیکی و سیالات

[ad_1]

PumpLinx is a 3-D Computational Fluid Dynamics (CFD) tool that provides accurate virtual testing for the analysis and performance prediction of fluid pumps, motors, compressors, turbines, valves, and complete fluid systems with rotating/sliding components. For liquid systems, PumpLinx’s proprietary Cavitation Module accurately models vapor, free gas and liquid compressibility to enable the analysis of performance, pressure ripple, and cavitation damage.

MAIN FEATURES:
Comprehensive physics
Flow, Turbulence, Conjugate Heat Transfer, Aeration, Cavitation, Particles

Accurate predictions
Excellent correlation with test data over the full operating range

Fast model creation, even faster simulation speed
Less than an hour from CAD to Simulation, < 15 min. for steady-state results

Able to model complex details down to the micro scale
Accurately model leakage gaps, tip clearances, balance holes, etc.

KEY ADVANTAGES
PumpLinx is built on Simerics MP’s baseline technology to provide a transient 3-D simulation software uniquely suited for the analysis and design of pumps and other fluid devices with rotating or sliding components.

Accurate Results:
    PumpLinx consistently provides simulation predictions that are within 5% of physical hardware test results over the full operating range.

Superior Cavitation/Aeration Module:
    PumpLinx rigorously and independently accounts for the formation, transport, and effects of non-condensable gases (e.g. air) and cavitation vapor, as opposed to using a lumped effective compressibility approach.

Fast Calculation Times:
    PumpLinx has repeatedly been shown to be more than 10 times faster than other commercial codes, enabling more complex simulations, including full transient analysis when needed.

Robust Solver:
    PumpLinx is able to converge extremely difficult problems, even those with detailed micro-scale features and/or severe cavitation.

– Ease of Use:
    Less than 30 minutes is typically required to create a model with the aid of templates, automated mesh generation and a single GUI for set-up, simulation, and post-processing. 

TEMPLATES
FOR VALVES, PUMPS, COMPRESSORS, TURBINES, AND MOTORS
PumpLinx provides templates/modules for different categories of components and systems. These templates and modules enable the rapid set-up and simulation of a full range of pumps, motors, turbines, and valves.

[ad_2]

لینک منبع